Removing
1 Pry out shift fork and compression spring with a screwdriver.
Compression spring is under tension.
W35.40-1041-11
Install
2 Place screwdriver (12) through the shift fork (3) and through the compression spring (2) on to differential assembly.
Pilot bushing (A) of shift fork (3) must point towards the screwdriver handle (12).
W35.40-1043-11
3 Press shift fork (3) down as far against the compression spring (2) until the pilot bushing (A) of the shift fork (3) is pinched in differential housing.
4 Remove screwdriver and press the shift fork (3) down until the pilot bushing (A) of the shift fork (3) fits in the hole for the pawl (C).