ar3540d913102a

Installing and adjusting differential lock shift cylinder

Vrsta ar · tema 35.40 · različica 0105 · 2001-07-24

Velja za: REAR AXLE 741.130 /131 /407 /408 with CODE (A71) Rear axle with differential lock REAR AXLE 741.130 /408 in MODEL 690.6 with CODE (A71) Rear axle with differential lock

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.40 Zapore diferencialov — Serija 690 (modeli 6**)

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.38 menjalnik — Serija 690 (modeli 6**)

Velja tudi za motorje/menjalnike: 741 130, 741 131, 741 407, 741 408

AR35.40-D-9131-02A

Installing and adjusting differential lock shift cylinder

Rear axle 741.130/131/407/408 with differential lock (code A71)

Installation: With new shift cylinder or if components of the differential lock have been replaced

Differential lock

Number

Designation

Rear axle
741.407/408/130/
131 with differential lock (code A71)

BA35.40-N-1002-01B

Bolt, shift cylinder to rear axle beam

M8

Nm

25

Installing and adjusting differential lock shift cylinder

D35.40-0007-01

1 Move shift cylinder to the applied position with hydraulic or pneumatic pressure.

2 Fit shift cylinder with new gasket on axle tube and screw in retaining bolts.

Do not tighten the retaining bolts.

3 Push shift cylinder towards the differential (arrow) until resistance can be felt.

4 Tighten shift cylinder bolts in this position .

5 Turn the axle shafts to check that the differential lock is engaged.

The differential lock must be engaged.