Remove/install radial sealing ring of input shaft

Vrsta ar · tema 35.30 · različica 0100 · 2010-11-05

Velja za: REAR AXLE 740.893 /895 /897 /898, 748.263 /273 /275 Through-drive axle NAG7 with ring gear-Ø 300 mm'

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.65 gonilo zadnje preme/medosno gonilo

Velja tudi za motorje/menjalnike: 740 893, 740 895, 740 897, 740 898, 748 263, 748 273, 748 275

AR35.30-W-4650MB

Remove/install radial sealing ring of input shaft

26.10.10

REAR AXLE 740.893 /895 /897 /898, 748.263 /273 /275
Through-drive axle NAG7 with ring gear-Ø 300 mm

W35.30-1085-06

1 Collar nut

2 Drive flange

3 Radial shaft sealing ring

4 Threaded ring

5 Locking plate

6 Jam nut

7 Threaded ring

A Version

B Version

Picture item, etc.	Work instructions
	Notes on evaluating leakages		AH00.00-N-0011-01A
	Remove/install drive flange at the rear axle	 Installation: Apply light coating of oil to contact surface of radial shaft sealing ring (3) on drive flange (2).	AR35.30-W-0473MB
	Threaded ring and through-drive cover changed		BT35.30-W-0009-01A
3	Radial shaft sealing ring