Through this change another "component/change sequence number" has been installed in the vehicle. To ensure that an exact parts identification can be assured, this modification must be documented in the vehicle data card in the VeDoc system.
Document
1 Call up data card in VeDoc.
2 In the SAA numbers tab, mark the previous component/change sequence number and delete using the "Remove SAA" button.
3 The "Add SAA" button can be used to enter a new component/change sequence number (see overview).
4 In the AO texts add the following comment: "Modification measure performed according to AR35.30-W-0476B".
Overview of previous/new "Component/change sequence number", vehicles with modified threaded ring (parts kit)
Previous component/change sequence number | is now | New component/change sequence number |
Z504.541/6 | > | Z504.541/24 |
Z504.541/7 | > | Z504.541/25 |
Z504.541/8 | > | Z504.541/26 |
Z504.541/9 | > | Z504.541/27 |
Z504.541/10 | > | Z504.541/28 |
Z504.541/11 | > | Z504.541/29 |
Z504.541/12 | > | Z504.541/30 |
Z504.541/13 | > | Z504.541/31 |
Z504.541/14 | > | Z504.541/32 |
Z504.541/22 | > | Z504.541/33 |