ar3530b481509a

Installing drive pinion with bearing in rear axle housing

Vrsta ar · tema 35.30 · različica 0100 · 2016-02-12

Velja za:

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi — Serija 688 (modeli 272, 276, 277)

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.65 gonilo zadnje preme/medosno gonilo — Serija 688 (modeli 272, 276, 277)

Velja tudi za motorje/menjalnike: 743 498

AR35.30-B-4815-09A

Installing drive pinion with bearing in rear axle housing

Installing drive pinion with bearing in rear axle housing

B33.30-0003-01

1 Install some compensating washers in the drive pinion seat inside the case.

Installing drive pinion with bearing in rear axle housing

B33.30-0004-01

2 Install the pinion assembly in its housing with the help of a plastic head hammer

Insert, in the taper roller bearing, the plastic bushing utilized at removal, to prevent bearing damage. The bushing will be expelled when installing the pinion assembly. Strike the assembly until the threaded ring touches the front face of the housing