Remove joint flange at drive pinion

Vrsta ar · tema 35.30 · različica 0101 · 2019-04-20

Velja za: Rear axle 741.710, 746.209 in model 958 Rear axle 746.213/230 in model 934.2 Rear axle 746.213/230 in model 958.2/4 except code ZC8 (New Final Drive-Top Performance Light) Rear axle 746.233 in model 938.1, 958 Rear axle 748.590/594 in model 934.2, 958

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 35 Zadnja prema › 35.30 Pogon, pogonske gredi — Serija 934 (modeli 2**) · Serija 938 (modeli 1**) · Serija 958

EinPAS 17 pogonski sklop/prema › 17.51 zadnja prema › 17.51.65 gonilo zadnje preme/medosno gonilo — Serija 934 (modeli 2**) · Serija 938 (modeli 1**) · Serija 958

Velja tudi za motorje/menjalnike: 741 710, 746 209, 746 213, 746 230, 746 233, 748 590, 748 594

AR35.30-B-4670-01B

Remove joint flange at drive pinion

Rear axle	741.710, 746.209 in model 958
Rear axle	746.213/230 in model 934.2
Rear axle	746.213/230 in model 958.2/4
	except code ZC8 (New Final Drive-Top Performance Light)
Rear axle	746.233 in model 938.1, 958
Rear axle	748.590/594 in model 934.2, 958

035 589 01 33 00

Puller

717 589 00 31 00

Retainer wrench

1	Unlock the collar nut (2) using a suitable tool.

2	Install the  locking key on the drive flange (1) and remove the collar nut (2).

 Do not use pneumatic device to loosen the collar nut (2) as it can cause damage to the tapered roller bearings.

B35.30-0195-01

3	Install the  extractor on the drive flange (1) and extract.

 Check the drive flange (1) for damage in internal spline and the contact surface with the radial retainer.

B35.30-0196-01