1 | Wheel carrier |
2 | Rear brake cable |
3 | Screw |
4 | Nuts |
5 | Wheel bearings |
S35.20-4508-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Remove left or right brake shoes of parking brake. | ||
2 | Remove left or right rear brake cable (2) from wheel carrier (1) and place to one side. | ||
3 | Remove rear axle rpm sensor from left or right wheel carrier (1) and place to one side with connected electric line. | ||
4 | Counterhold nuts (4) and remove screws (3). | ||
Topical note | Notes on threaded connections fastened using a tightening angle-based tightening process | ||
Topical note | Notes on self-locking nuts and bolts | ||
Installation: Replace bolts (3) and nuts (4). | |||
Screw/nut, wheel carrier to semi-trailing arm | |||
5 | Remove wheel carrier(1). | The wheel carrier (1), wheel hub and wheel bearing (5) form a unit and can only be removed together. | |
6 | Install in the reverse order. |