P35.30-2069-09
5 | Radial shaft sealing ring | 9 | Wheel hub | |
6 | Inner wheel bearing | 10 | Outside wheel bearing outer race | |
7 | Inside wheel bearing outer race | 11 | Outside wheel bearing | |
8 | ABS measuring ring |
| Remove | ||
1 | Remove wheel hub (9) | ||
2 | Remove radial shaft sealing ring (5) of the inner wheel bearing (6) | ||
3 | Remove inner wheel bearing (6) and outer wheel bearing (11) | ||
4 | Remove bearing outer race of the outer wheel bearing (10) from the wheel hub (9) using a suitable, commercially available puller | Removal: Puller for bearings from 56 mm to 110 mm | |
5 | Remove bearing outer race of the inner wheel bearing (7) from the wheel hub (9) using a suitable, commercially available puller | Removal: Puller for bearings from 56 mm to 110 mm | |
| Install | ||
6 | Use a suitable drift punch to drive the outside wheel bearing's outer race (10) into place | ||
7 | Use a suitable drift punch to drive the inside wheel bearing's outer race (7) into place | ||
8 | Grease the inner wheel bearing (6) thoroughly before installation | MB multipurpose grease, 5 kg | |
9 | Install inside wheel bearing (6) | ||
10 | Drive the new radial shaft sealing ring (5) in using a suitable drift | The radial shaft sealing ring (5) should be flush with the wheel hub (9) (recessed by max. 3 mm). | |
11 | Fill the space between the dust guard and sealing lip with multipurpose grease | MB multipurpose grease, 5 kg | |
12 | Grease the outer wheel bearing (11) thoroughly before installation | MB multipurpose grease, 5 kg | |
13 | Install outer wheel bearing (11) | ||
14 | Install wheel hub (9) |