ar3320w034001a

Checking and adjusting axial play of input shaft

Vrsta ar · tema 33.20 · različica 0103 · 2007-07-23

Velja za: FRONT AXLE 730.100 /101 /102 /108 /109 /110 /114 /115 /116

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 33 Sprednja prema › 33.20 Obese koles, pesto

EinPAS 17 pogonski sklop/prema › 17.50 sprednja prema › 17.50.51 polgred/pogonska gred

Velja tudi za motorje/menjalnike: 730 100, 730 101, 730 102, 730 108, 730 109, 730 110, 730 114, 730 115, 730 116

AR33.20-W-0340-01A

Checking and adjusting axial play of input shaft

Test values for drive shaft

Number

Designation

Front axle 730.1

BE33.30-N-1001-04A

End play of input shaft

mm

0.20.1

Checking and adjusting axial play of input shaft
Checking and adjusting axial play of input shaft
Checking and adjusting axial play of input shaft

366 589 00 21 05

001 589 53 21 00

363 589 02 21 00

Extension

Dial indicator holder

Dial indicator

Checking and adjusting axial play of input shaft

W33.20-0012-01

Check

1 Secure dial indicator (2) with dial indicator holder (1) and extension (3) to bell hub.

2 Position measuring tip of dial indicator (2) on input shaft with approx. 1 mm preload.

3 Press against shim (4) and move input shaft toward wheel hub and axle center alternately using an assembly lever (arrow) while reading off axial play of input shaft from dial indicator (2).

The axial play must be adjusted if there are deviations from the specified value.

Adjust

4 Adjust axial play of input shaft using appropriate shim.