Remove/install pedal assembly

AR29.10-D-0300C

7.12.09

MODEL 901.6, 902.6, 903.6, 904.6 with CODE (GD5) Automated manual transmission 716.643

MODEL 901.6, 902.6, 903.6, 904.6 with CODE (G40) Automatic transmission

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (G40) Automatic transmission

D29.10-1102-11

1 Hexagon bolt

2 Pedal bearing bracket

3 Stop lamp switch

4 Washer

5 Hexagon bolt

6 Pin

7 Spring

8 Brake pedal

9 Fuse

10 Pin

11 Thrust rod

12 Fuse

 	Remove/install
 Danger!	Risk of poisoning caused by swallowing brake fluid. Risk of injury caused by brake fluid coming into contact with skin and eyes.	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
	Brake fluid notes		AH42.50-P-0001-01A
	Notes on repairs to brake system		AH42.00-P-0003-01A
1	Remove retainer (12) and pin (10)	Grease pin
5	Remove retainer (9) and pin (6)	Grease pin
6	Unhook spring (7) and remove brake pedal (8)
3	Detach connector from brake light switch (3)
4	Remove screws (1, 5) and remove pedal support (2)		*BA29.10-N-1001-02B
5	Install in the reverse order

 Pedals, bearing bracket

Number	Designation		Model 690.6, 901, 902, 903,904, 905	Model WD1/WD2/ WD3/WD6/ WD7/XD1/ XD2/XD3/ XD4/XD5/ XD6/XD7/ YD1/YD2/ YD3/YD4/ YD5/YD6/ YD7


BA29.10-N-1001-02B	Bolt, pedal support to firewall	Nm	23	23