Setting selector lever control cable

Vrsta ar · tema 27.60 · različica 0103 · 1999-08-23

Velja za: TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943 TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980 TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

AR27.60-D-1475A

26.9.97

TRANSMISSION 722.330 in MODEL 901.3, 902.3, 903.3 with ENGINE 601.943

TRANSMISSION 722.375 in MODEL 901.4, 902.4, 903.4, 904.4 with ENGINE 602.980

TRANSMISSION 722.376 in MODEL 901.06, 902.0, 903.0, 904.0 with ENGINE 111.979

D27.60-0001-06

1 Clamping bolt

2 Control cable

3 Range selector lever

	Adjusting
1	Place selector lever in position "2".
2	Loosen bolt (1) on clamping bore
3	Unhook control cable (2) from range selector lever (3) and place range selector lever in position "2"
4	Slide control cable (2) through the clamping bore until it can be hooked into the range selector lever (3)
5	Tighten bolt (1) on clamping bore.		*BA27.60-N-1002-05B

 Shift mechanism, control

Number	Designation		Transmissions 722.330/337	Transmissions 722.332/375/376


BA27.60-N-1002-05B	Clamping bolt, selector lever control cable to transmission housing	Nm	1	1