1 | Screw |
2 | Detent plate |
3 | Range selector lever |
4 | Pilot bushing |
5 | Bearing bracket |
6 | Screw |
D27.60-1108-06
4 | Pilot bushing |
7 | O-ring |
8 | Retaining ring |
9 | Retaining ring |
10 | O-ring |
11 | Pin |
12 | Locking pawl |
13 | Spring |
14 | Radial shaft sealing ring |
D27.60-1106-06
| Remove/install | ||
1 | Remove automatic transmission |
| |
Transmission 722.683/684/685/686 | |||
2 | Remove electrohydraulic controller unit | ||
3 | Remove bearing bracket (5) | Screw/bolt, bearing bracket to transmission housing | |
4 | Unscrew screw/bolt (1) | Bolt, detent plate to selector lever shaft | |
5 | Remove range selector lever (3) | ||
6 | Remove detent plate (2) with linkage | Installation: Insert linkage in the pilot bushing (4). | |
7 | Remove circlips (8, 9) | Installation: Replace locking ring (9). | |
8 | Push bolts (11) out from the inside (arrow B) | Installation: Replace O-ring (10). | |
9 | Remove pilot bushing (4) using a suitable round-nosed pliers | Pull up lock pawl (12) at one end (arrow A) and simultaneously press the other end away under the pilot bushing (4) (arrow C). | |
Installation: Replace O-ring (7). | |||
10 | Remove lock pawl (12) with spring (13) | Installation: Insert spring (13) in the spring seat in the transmission housing. | |
11 | Remove radial shaft sealing ring (14) | Installation: Replace radial shaft sealing ring (14). | |
Drift | |||
12 | Install in the reverse order |
722 589 02 15 00
Drift