Removing and installing output flange

Vrsta ar · tema 27.50 · različica 0103 · 2016-02-01

Velja za: Transmission 722.683/684/685/686 in model 906 with code ZG1 (Engageable all-wheel drive) Transmission 722.683/684/685/686 in model 906 with code ZG3 (Engageable all-wheel drive with gear reduction)

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 27 Samodejni menjalnik › 27.50 Sklop zobnikov — Serija 906

EinPAS 17 pogonski sklop/prema › 17.20 menjalnik › 17.20.41 prirobnica — Serija 906

Velja tudi za motorje/menjalnike: 722 683, 722 684, 722 685, 722 686

AR27.50-D-0620-02B

Removing and installing output flange

Transmission	722.683/684/685/686 in model 906
	with code ZG1 (Engageable all-wheel drive)
Transmission	722.683/684/685/686 in model 906
	with code ZG3 (Engageable all-wheel drive with gear reduction)

 Gear set

Number	Designation		TRANSMISSION 722.683/684/685/ 686
BA27.50-N-1001-01A	Collar nut, output flange to output shaft	Nm	200

716 589 01 15 00

Drift

000 589 89 33 00

Puller

126 589 02 09 00

Socket wrench bit

Remove output flange
 The selector lever must be in the park position.

1	Unscrew collar nut (1) using  socket.

2	Remove output flange (2) using  puller.

Install output flange

3	Install output flange (2) and tighten collar nut (1) using  socket,  .

 Install new collar nut (1).

4	Secure collar nut (1) using drift  .

D27.50-1160-01