Remove/install oil pump radial shaft sealing ring

AR27.40-D-0300A

27.4.09

TRANSMISSION 722.681 in MODEL 902.6, 903.6, 904.6, 905.6

TRANSMISSION 722.681 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

TRANSMISSION 722.683 in MODEL 906.1 /2 /6 /7

TRANSMISSION 722.684 in MODEL 906.1 /2 /6 /7

TRANSMISSION 722.685 in MODEL 906.1 /2 /6 /7

TRANSMISSION 722.686 in MODEL 906.1 /2 /6 /7

D27.40-1104-05

1 Radial shaft seal

2 Input shaft

	Removing
1	Remove automatic transmission	Transmission 722.681	AR27.10-D-0502A
		Transmission 722.683/684/685	AR27.10-D-0502B
		Transmission 722.686	AR27.10-D-0502WE
2	Remove torque converter	Transmission 722.681	AR27.20-D-0500-01B
			*126589016200
3	Remove radial shaft sealing ring (1).	 Carefully remove radial shaft sealing ring (1), to ensure that the drive shaft and transmission housing are not damaged.
	Install
4	Press new radial shaft sealing ring (1) into a flush fit in the transmission housing		*722589001500
5	Insert torque converter.	Transmission 722.681	AR27.20-D-0500-01B
			*BE27.20-N-1001-01C
			*126589016200
6	Install automatic transmission	Transmission 722.681	AR27.10-D-0502A
		Transmission 722.683/684/685	AR27.10-D-0502B
		Transmission 722.686	AR27.10-D-0502WE

Torque converter

Number	Designation		Transmission 722.681


BE27.20-N-1001-01C	The difference in height "A" between the contact surface of the converter angled brackets and the transmission flange	mm	55

722 589 00 15 00

Drift

Grab handle

126 589 01 62 00