Transmission oil cooling system
Number | Designation | Trans-mission | |||
BA27.55-N-1002-01I | Bolt, transmission oil line to transmission housing | Banjo bolt | Stage 1 | Nm | 5 |
Stage 2 | ° | 90 | |||
Hexalobular bolt | Nm | 12 | |||
BA27.55-N-1004-01I | Bolt, dual clamp to oil line | Nm | 8 | ||
Set of stop plugs
129 589 00 91 00
D27.10-1143-06
1 Remove bolt (3) and remove holder (4)
Installation: Observe tightening torque of screw/bolts (3).
2 Unscrew bolts (1).
Installation: Observe tightening torque for bolts (1).
3 Detach oil lines (2, 5) from transmission.
Collect transmission oil which flows out in a suitable vessel.
Installation: Install new sealing rings.
4 Seal openings on transmission and on oil lines (2, 5) using stop plugs.
5 Install in the reverse order.