D26.50-0072-06
Shown on: transmission 711.603
4 Front section of transmission housing
5 Locking ring
6 Ball bearing
7 Drive shaft
8 Locking ring
| Disassembling, assembling | ||
1 | Disassemble transmission housing | ||
| Removing, installing | ||
2 | Remove shaft seal of drive shaft | ||
3 | Remove locking ring (5) | ||
4 | Press off drive shaft (7) in direction of locking ring (8) using a suitable drift punch. | ||
5 | Remove locking ring (8) | Circlip pliers | |
6 | Press out drive shaft ball bearing (6) using a suitable drift punch | ||
7 | Assemble in reverse order |
711 589 00 37 00
Circlip pliers