Shown with code ZG1 (All-wheel drive, engageable) |
1 | Screw |
2 | Electrical connector |
S164 | Transmission neutral position switch |
D26.19-1178-06
Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
| Remove/install | ||
1 | Raise vehicle | ||
2 | Unscrew bolt (1) | ||
Topical note | Notes on self-locking nuts and bolts | ||
Installation: Replace screw/bolt (1). | |||
Screw/bolt, transmission neutral switch | |||
3 | Disconnect electrical connection (2) | ||
4 | Remove the switch for transmission neutral position (S164) | Installation: Replace seal. | |
5 | Install in the reverse order | ||
| Check | ||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
6 | Check for leak tightness with engine running | Visual inspection only. |