ar2320w9430b

Remove/install rear engine power take-off.

Vrsta ar · tema 23.20 · različica 0108 · 2010-12-07

Velja za: ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (N52) Rear engine power take-off, output torque 600 Nm ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (N52) Rear engine power take-off, output torque 600 Nm ENGINES 904.9, 906.9, 924.9, 926.9 in MODEL 958.0 with CODE (N52) Rear engine power take-off, output torque 600 Nm ENGINES 906.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (N52) Rear engine power take-off, output torque 600 N

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 23 Dodatno vgrajene komponente › 23.20 Odgon motorja zadaj — Serija 375 (modeli 1**, 3**) · Serija 902 (modeli 9**) · Serija 904 (modeli 9**) · Serija 906 (modeli 9**) · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 17 pogonski sklop/prema › 17.45 pomožni odgon › 17.45.30 pomožni odgon, celoten — Serija 375 (modeli 1**, 3**) · Serija 902 (modeli 9**) · Serija 904 (modeli 9**) · Serija 906 (modeli 9**) · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

Velja tudi za motorje/menjalnike: 924 9**, 925 9**, 926 9**

AR23.20-W-9430B

Remove/install rear engine power take-off.

23.11.10

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 902.9 in MODEL 375.1, 970, 972, 974, 975, 976 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 904.9, 906.9, 924.9, 926.9 in MODEL 958.0 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 906.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 906.9 in MODEL 970, 972, 974, 975, 976 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 925.9 in MODEL 970, 972, 974 with CODE (N52) Rear engine power take-off, output torque 600 Nm

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2 with CODE (N52) Rear engine power take-off, output torque 600 Nm

Remove/install rear engine power take-off.

W23.20-1000-10

1 Rear engine power take-off

2 Sealing ring

3 Drive flange

Remove/install

Danger!

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within tilting range of cab as it is being tilted. Always tilt cab all the way to end position and secure with safety strut.

AS60.80-Z-0001-01A

1

Tilt cab

Notes on tilting the cab

AH60.80-N-0003-01A

2

Remove soundproofing on frame at top right and below

3

Disconnect propeller shaft from drive flange (3)

Only when an auxiliary unit is installed.

*BA23.20-N-1004-01C

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

4

Remove rear engine power take-off (1) at timing case

Slightly heat up the outside of the timing case around the rear engine power take-off (1) using a hot air blower.

Installation: Screw in bolts with thread M81.25 as an assembly aid into the timing case. When pressing in the rear engine power take-off (1), observe the hole pattern.

*BA23.20-N-1002-01C

5

Remove sealing ring (2)

6

Install in the reverse order

Rear engine power take-off

Number

Designation

Engine 900.9, 902.9, 904.9, 906.9, 924.9, 925.9, 926.9 with code N52

BA23.20-N-1002-01C

Bolt, engine power take-off to timing case

Nm

25

BA23.20-N-1004-01C

Bolt, propeller shaft to drive flange

Nm

25

Povezani dokumenti