Remove/install air filter

AR09.10-P-1050C

16.12.08

ENGINE 611.961 as of 1.7.99 in MODEL 210.006 /007 /206 /606

ENGINE 612.961 in MODEL 210.016 /216 /616

ENGINE 612.963 in MODEL 163.113

ENGINE 613.961 in MODEL 210.026 /226

ENGINE 613.960 in MODEL 220.026

ENGINE 611.962 in MODEL 203.004 /006 /204 /206 /706

ENGINE 612.962 in MODEL 203.016 /216

ENGINE 612.967 in MODEL 209.316

ENGINE 612.990 in MODEL 203.018 /218 /718

P09.10-2018-06

Illustrated on model 210

4/1 Top part of air filter

4/2 Air intake hose

4/3 Intake air scoop

4/4 Air filter element

4/5 Bottom part of air filter

B2/5 Mass air flow sensor hot film

 	Remove/install
1	Remove cylinder head cover trim	Engine 611	AR01.20-P-5014-02A
		Engine 612	AR01.20-P-5014-02B
		Engine 613	AR01.20-P-5014-02C
			*BA01.20-P-1002-01A
			*BA01.20-P-1003-01A
2	Unplug electrical connector at hot film mass air flow sensor (B2/5)
3	Remove air intake hose (4/2) at air filter	 Inspect condition of hose clamp and hose, replace if necessary.
		7 mm socket hexagon on flexible shaft for hose clamps with worm drive
		6 mm socket hexagon on flexible shaft for hose clamps with worm drive
4	Remove intake air scoop (4/3) at air filter
5	Remove top part of air filter (4/1)
6	Take off air filter element (4/4)
7	Remove bottom part of air filter (4/5)	 Pay attention to washers (at engine side).
8	Install in the reverse order

 Crankcase ventilation, cylinder head cover

Number	Designation		Engine 611.960/ 961/962	Engine 612.961/ 962/967	Engine 612.963	Engine 612.990


BA01.20-P-1002-01A	Bolt, trim panel for cylinder head cover to cylinder head cover	Nm	10	10	10	8
BA01.20-P-1003-01A	Bolt, charge air distribution pipe cover to charge air manifold	Nm	10	10	10	-