AR07.08-D-7006SD | Remove/install electronic diesel system (EDS) control unit | 16.6.10 |
ENGINES 642.896 /992, 646.984 /985 /986 /989 /990 in MODEL 906
D07.08-1108-08
1 Locking lever
2 Electrical connector
3 Locking lever
4 Electrical connector
N3/30 CDI control unit
(with engine 642.896)
N3/20 CDI control unit
(with engine 642.992)
N3/21 CDI control unit
(with engine 646)
| Remove/install | ||
| Information on preventing damage to electronic components due to electrostatic discharge | ||
1 | Disconnect battery ground line | ||
2 | Remove battery tray | Only for code (E28) Additional battery 12 V 88 Ah | |
3 | Pull locking lever (1, 3) to outside and disconnect electrical connectors (2, 4) at the CDI control unit (N3/20, N3/21 or N3/30) | Installation: Ensure correct seating of seals in electrical connectors (2, 4). | |
4 | Unclip CDI control unit (N3/20, N3/21 or N3/30) from the bracket (arrows) and remove | ||
5 | Install in the reverse order | ||
6 | Connect STAR DIAGNOSIS, read out DTC memory and erase if required | ||
| Connect STAR DIAGNOSIS and read out fault memory |