Vrsta ar · tema 05.00 · različica 0306 · 2006-10-17
Velja za: ENGINE 904.904 ## up to 039739 in MODEL 670 ENGINE 904.908 /914 /923 /936 ## up to 039739 in MODEL 668, 670 ENGINE 904.9## ## up to 039739 in MODEL 673, 674, 676 ENGINE 904.9## ## up to 039739 in MODEL 375, 970, 972, 975, 976 ENGINE 906.9## ## up to 041955 in MODEL 970, 972, 974, 975, 976
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Carry out setting of relevant valve bridges (3) only if engine is cold or fully warmed through. Wait at least 30 minutes after switching off the engine.
1 Clamp relevant valve bridge (3) in a vise, slacken jam nut (1) and remove adjusting bolt (2) about 3 turns.
W05.00-0013-01
2 Install valve bridge (3) over the guide pins at the cylinder head.
3 Push down valve bridge (3) until it is resting on the valve stem (arrow A).
4 Screw in adjusting screw (2) by hand with valve bridge (3) pushed down until it is resting on the valve stem (arrow B).
5 Tighten jam nut (1) by hand.
6 Remove valve bridge (3) from cylinder head.
W05.00-0012-01
7 Clamp valve bridge (3) in the vise.
8 Adjusting screw (2) and jam nut (1) .
9 Install relevant valve bridge (3) to cylinder head again via the guide pins.
