ar0320w4841j

Remove/install drive gear for oil pump on crankshaft

Vrsta ar · tema 03.20 · različica 0103 · 2010-12-06

Velja za: ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976 ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5 ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976 ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976 ENGINES 925.9 in MODELS 970, 972, 974 ENGINES 926.9 in MODEL 958.0 ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 1 Motor › 03 Pogonski mehanizem › 03.20 Ročična gred — Serija 375 (modeli 1**, 3**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 15 motor › 15.15 motor z notranjim zgorevanjem, celoten/ohišje motorja/mehanizem ročične gredi › 15.15.41 ročična gred/vztrajnik/sojemalna plošča — Serija 375 (modeli 1**, 3**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

EinPAS 15 motor › 15.20 sistem mazanja motorja › 15.20.30 oljna črpalka/pogon/brizgalna šoba za olje/sesalna cev za olje — Serija 375 (modeli 1**, 3**) · Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 950 (modeli 5**, 6**) · Serija 952 (modeli 5**, 6**) · Serija 953 (modeli 6**) · Serija 954 (modeli 5**) · Serija 957 · Serija 958 (modeli 0**, 2**) · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976

Velja tudi za motorje/menjalnike: 924 9**, 925 9**, 926 9**

AR03.20-W-4841J

Remove/install drive gear for oil pump on crankshaft

23.11.10

ENGINES 900.9 in MODELS 375.1, 970, 972, 975, 976

ENGINES 902.9 in MODEL 375.3, 950.5 /6, 952.5 /6, 953.6, 954.5

ENGINES 902.9 in MODEL 957 except CODE (MS8) Natural gas engine

ENGINES 902.9 in MODELS 375.1, 970, 972, 974, 975, 976

ENGINES 924.9 in MODELS 958.0, 970, 972, 974, 975, 976

ENGINES 925.9 in MODELS 970, 972, 974

ENGINES 926.9 in MODEL 958.0

ENGINES 926.9 in MODEL 950.5 /6, 952.5 /6, 953.6, 954.5, 957, 958.2

Remove/install drive gear for oil pump on crankshaft

W03.20-1133-06

1 Drive gear

2 Crankshaft

Arrow Groove

Removing

1

Remove crankshaft (2)

AR03.20-W-4351J

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

2

Heat drive gear (1) with hot air gun and remove from the crankshaft (2)

Install

Danger!

Risk of injury to skin and eyes caused by handling hot or glowing objects.

Wear safety gloves, protective clothing and safety glasses, if necessary.

AS00.00-Z-0002-01A

3

Heat drive gear (1) with hot air gun up to about 200°C and mount on the crankshaft (2)

Use temperature measuring device with a measuring range of -200°C to +1000°C.
Observe installation position of groove (arrow) on drive gear (1).

4

Install crankshaft (2)

AR03.20-W-4351J

Povezani dokumenti