Replace rear crankshaft radial seal

AR03.20-D-3063AD

Replace rear crankshaft radial seal

16.8.06



Removing

1.1

Remove flywheel (1)

Transmission 712.613, 715.051

AR03.30-D-8002AD

1.2

Remove driven plate

Transmission 723.332

AR03.30-D-8003AD

2

Pry out radial sealing ring (2) using a suitable tool

 Cover over crankshaft flange with a cloth as a protection against getting damaged. Do not damage timing case (4).



Checking

3

Thoroughly clean timing case (4) and flywheel (1) or ring gear carrier in the area of radial sealing ring (2)

4

Check flange on flywheel (1) or ring gear carrier for galling by radial sealing ring (2)

 Replace flywheel (1) or ring gear carrier if there is galling on the flange.



Install

5

Place drift (2) with radial sealing ring (3) on timing case and knock in until drift (3) is flush on timing case (4)

 Hammer in radial sealing ring (2) dry, axially parallel and evenly around the entire circumference. The hammering in depth is preset by the drift punch (3).

Correct for correct seating of radial sealing ring (2) sealing lip.



*904589031500

6.1

Install flywheel (1)

Transmission 712.613, 715.051

AR03.30-D-8002AD

6.2

Install driven plate

Transmission 723.332

AR03.30-D-8003AD