ar0130b580001b
Tightening procedure for cylinder head bolts
Vrsta ar · tema 01.30 · različica 0201 · 2019-10-16
Velja za: Engine 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/289/290 Engine 904, 906, 924, 926 in model 693
Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.
Umestitev
Funkcijska skupina 1 Motor › 01 Motor v celoti, odzračevanje motorja, glava motorja, okrov motorja › 01.30 Glava motorja — Serija 368 · Serija 382 · Serija 384 · Serija 634 · Serija 685 (modeli 282, 284, 289, 290) · Serija 693 · Serija 904 · Serija 906
EinPAS 15 motor › 15.16 glava motorja › 15.16.31 glava motorja/tesnilo glave motorja — Serija 368 · Serija 382 · Serija 384 · Serija 634 · Serija 685 (modeli 282, 284, 289, 290) · Serija 693 · Serija 904 · Serija 906
Velja tudi za motorje/menjalnike: 924 ***, 926 ***
AR01.30-B-5800-01B
| Tightening procedure for cylinder head bolts
| Engine 904.9, 906.9, 924.9, 926.9
|
|
Engine
| 904, 906, 924, 926 in model 368, 382, 384, 634, 685.282/284/289/290
|
Engine
| 904, 906, 924, 926 in model 693
|
Number
| Designation
|
|
| Engine 904.9, 906.9
| Engine 924.9, 926.9
|
BA01.30-B-1002-01C
| Crankcase bolt
| 1st stage
| Nm
| 20
| 20
|
|
|
| 2nd stage
| Nm
| 70
| 70
|
|
|
| 3rd stage
| Nm
| 170
| 170
|
|
|
| 4th stage
| Nm
| 280
| 280
|
|
|
| 5th stage
| Graus
| 90
| 90
|
|
|
| 6th stage
| Graus
| 90
| 90
|
1
| Tighten the bolts of the head using the socket.
|
|
| Note the tightening sequence indicated in the figure.
|
|
| If the bolt tightening torque is exceeded, remove it, check the maximum allowable length (replace if necessary), and tighten it from the 1st step.
|
|
| Replacing the bolts whose length exceeds the maximum allowable value is mandatory.
|
|
| Do not retighten the bolts on the cylinder head.
|
