P54.10-4293-08
Shown on model 166.063, valid for model 166.063, 205.013/047/053/054/147/213/247/253, 213.011/016/050/053/054/153/155/211/216/253, 222.163/173, 253.311/353/354/911/953/954 |
1 | Charging cable | 4 | Charger feed-in socket | |
2 | Cap | 5 | Lock | |
3 | Sequence |
P54.10-3985-08
Shown on model 242.890, valid for model 242.890 |
1 | Charging cable | 4 | Charger feed-in socket | |
2 | Cap | 5 | Lock | |
3 | Sequence |
P54.10-A111-08
Shown on model 167.154 except code 830 (China version), valid for model 167.117/317 and model 167.154/354 except code 830 (China version) |
1 | Charging cable | 4 | Charger feed-in socket | |
2 | Cap | 5 | Locks | |
3 | Sequence |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system as well as personal protective equipment | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
| Remove | ||
1 | Remove charging cable (1) from vehicle. | ||
| Check | ||
2 | Check entire length of charging cable (1), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems are determined, | |
| |||
replace charging cable (1). | |||
After obtaining special order. | |||
| Install | ||
3 | Place charging cable (1) in vehicle. | ||
| Check | ||
4 | Check charger feed socket (4) for damage. | If problems are determined, | |
| |||
Replace charger feed socket (4). | |||
After obtaining special order. | |||
5 | Check that cap (2) is firmly seated on charger feed socket (4). | If problems are determined, | |
| |||
Replace charger feed socket (4). | |||
After obtaining special order. | |||
6 | Check drain (3) for clear passage and soiling. | | |
If problems are determined, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Check locks (5) by opening and closing the cap (2). | If problems are determined, | |
| |||
Replace charger feed socket (4). | |||
After obtaining special order. |