Check brake lining thickness

Vrsta ap · tema 42.10 · različica 0100 · 2017-01-19

Velja za: Model 930, 932, 933, 934 with code BB4 (Disc brakes on front axle,drum brakes on rear axle) with code BB6 (Drum brakes on front and rear axle) Without brake wear sensor on automatic linkage adjuster

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 42 Hidravlika zavor in mehanika › 42.10 Delovna zavora — Serija 930 · Serija 932 · Serija 933 · Serija 934

EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.40 delovna zavora, spredaj — Serija 930 · Serija 932 · Serija 933 · Serija 934

EinPAS 21 zaviranje/podtlačni sistem/pnevmatski sistem › 21.15 delovna zavora/podtlačni sistem › 21.15.42 delovna zavora, zadaj — Serija 930 · Serija 932 · Serija 933 · Serija 934

AP42.10-W-4253B

Check brake lining thickness

16.01.2017

Model	930, 932, 933, 934
	with code BB4 (Disc brakes on front axle,drum brakes on rear axle)
	with code BB6 (Drum brakes on front and rear axle)
	Without brake wear sensor on automatic linkage adjuster

Inspection holes on brake carrier plate

Plug

N42.10-0529-01

	Check
1	Remove stop plugs (4) from the inspection holes of brake carrier plates
2	Check brake lining thickness on all drum brakes	 The wear limit is indicated by a stepped edge (arrow).
		Model 930, 932, 933, 934Brake lining wear limit, drum brake with camshaft	*BE42.10-N-1006-10B
3	Install stop plugs (4) from the inspection holes of brake carrier plates

Test and adjustment values for service brake

Number	Designation			Model 930, 932, 933, 934, 944, 950, 952, 953, 954, 957
BE42.10-N-1006-10B	Brake lining wear limit, drum brake with camshaft	Normal	mm	5
		Rep. I	mm	6
		Rep. II	mm	7