Read out brake wear in display

AP42.00-W-4293H

Read out brake wear in display

22.07.2019

Model

956, 963, 964, 967



Check

1

Switch on ignition

 A function check of all systems is carried out. The Basic menu is shown on the multifunction display.

2

Press button (2 or 4) until the Main menu (6) is shown

3

Press button (1 or 3) until "Maintenance" menu window is displayed

4

Press OK (5) button

5

Press button (1 or 3) until "Brakes on axle 1" is displayed

 The estimated remaining time and remaining distance are displayed.
If the remaining time/remaining distance is low, visually inspect the brake lining thickness; replace the brake pads if necessary (subject to a separate repair order).

6

Press button (3) to select "Brakes on axle 2"

 The estimated remaining time and remaining distance are displayed.
If the remaining time/remaining distance is low, visually inspect the brake lining thickness; replace the brake pads if necessary (subject to a separate repair order).

7

Repeatedly pressing the button (3) enables the values of the other axles to be read out in the multifunction display

Axle assignment of brake lining sensors

AH42.10-N-1007-01A

 Enter the read out measurement values on the maintenance sheet.

8

Press button (1) or OK button (5) to exit menu (6)