Danger | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | |
Warning | Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities. | No parts of the body or limbs should be within the operating area of mechanical components when moving components. | |
Preparatory activity | |||
1 | Lift/jack up vehicle | ||
| Model 415 | ||
| Model 447, 448 | ||
| Model 470, 471 | ||
| Model 907, 910 | ||
| Check | ||
2 | Check drive shafts for cracks, deformation, corrosion, and check for play by firmly pulling and pushing. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
3 | Check drive shaft boots and clamps for condition, leak tightness and correct seating. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
4 | Check flex disks for crack formation, wear, damage and deformation. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
5 | Check propeller shaft flange for crack formation, wear, damage and deformation. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
6 | Check propeller shaft intermediate bearing for mounting, crack formation, wear, damage and deformation. | If problems occur, | |
| |||
rectify the problems. | |||
After obtaining special order. | |||
Finishing activity | |||
7 | Lower vehicle. | ||
| Model 415 | ||
| Model 447, 448 | ||
| Model 470, 471 | ||
| Model 907, 910 |