ap3310s3358e

Check condition of front axle and front axle ball joints

Vrsta ap · tema 33.10 · različica 0100 · 2018-12-03

Velja za: Model 415, 447, 448, 470, 471, 907, 910

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 33 Sprednja prema › 33.10 Sprednja prema v celoti — Serija 415 · Serija 447 · Serija 448 · Serija 470 · Serija 471 · Serija 907 · Serija 910

EinPAS 17 pogonski sklop/prema › 17.50 sprednja prema › 17.50.30 sprednja prema, celotna — Serija 415 · Serija 447 · Serija 448 · Serija 470 · Serija 471 · Serija 907 · Serija 910

AP33.10-S-3358E

Check condition of front axle and front axle ball joints

23.11.2018

Model

415, 447, 448, 470, 471, 907, 910

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Warning

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating area of mechanical components when moving components.

AS00.00-Z-0009-01A

Preparatory activity

1

Lift/jack up vehicle

Model 415

AR00.60-S-1000C

Model 447, 448

AR00.60-S-1000E

Model 470, 471

AR00.60-S-1000-04P

Model 907, 910

AR00.60-D-1000-04TS

Check

2

Check underfloor paneling for evidence of driving over obstacles or bottoming damage.

If the underfloor paneling exhibits damage:

Remove underfloor paneling and check front axle carrier for damage.

After obtaining special order.

3

Assess the wheel bearings by firmly tugging, pushing and turning at the wheels.

If problems occur,

rectify the problems.

After obtaining special order.

4

Check front axle carrier for cracks, deformation and corrosion.

If problems occur,

rectify the problems.

After obtaining special order.

5

Check stabilizer bar bushings for cracks, deformation and wear, also check for play by firmly pulling and pushing.

If problems occur,

rectify the problems.

After obtaining special order.

6

Check elastomer bearings of transverse control arm for cracks, deformation and wear, also check for play by firmly pulling and pushing.

If problems occur,

rectify the problems.

After obtaining special order.

7

Check supporting joint boots for condition, leak tightness and correct seating.

If problems occur,

rectify the problems.

After obtaining special order.

8

Check supporting joints for play by firmly pulling and pushing.

If problems occur,

rectify the problems.

After obtaining special order.

9

Check joint boots on torsion bar linkage for condition, leak tightness and correct seating.

If problems occur,

rectify the problems.

After obtaining special order.

10

Check joints of torsion bar linkage for play by firmly pulling and pushing on the linkage.

If problems occur,

rectify the problems.

After obtaining special order.

Finishing activity

11

Lower vehicle.

Model 415

AR00.60-S-1000C

Model 447, 448

AR00.60-S-1000E

Model 470, 471

AR00.60-S-1000-04P

Model 907, 910

AR00.60-D-1000-04TS

Povezani dokumenti