ap3225p3255s

Check condition of suspension struts or shock absorbers and springs

Vrsta ap · tema 32.25 · različica 0100 · 2014-09-26

Velja za: MODEL 453

Ni na voljo v jeziku »sl«; prikazano v jeziku Angleščina.

Umestitev

Funkcijska skupina 2 Podvozje › 32 Vzmetenje › 32.25 Blažilniki, blažilne noge, vzmetne noge — Serija 453

EinPAS 20 podvozje › 20.16 vzmetenje › 20.16.30 vzmet/vzmetni meh/blažilnik/vzmetna noga — Serija 453

AP32.25-P-3255S

Check condition of suspension struts or shock absorbers and springs

07.07.2014

MODEL

453

Check condition of suspension struts or shock absorbers and springs

P32.25-2348-08

Front axle suspension strut shown

3

Suspension strut bearing

7

Spring seat

4

Buffer

8

Piston rod

5

Boot

9

Shock absorber

6

Spring

Check condition of suspension struts or shock absorbers and springs

P32.25-2351-09

Rear axle shown

4

Buffer

10

Spring cup

6

Spring

11

Dust boot

9

Shock absorber

Danger !

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Danger !

Risk of injury. Moving parts can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

Preparatory activity

1

Lift vehicle on vehicle lift

Check

2

Damage, deformation and corrosion which occurs must be compared against the damage profiles

AP32.00-P-3255-01A

3

Check shock absorber (9) for external leaks

A thin film of oil on the shock absorber (9) is acceptable.

If there are problems:

Rectify problem subject to separate repair order.

4

Check shock absorber (9) for external damage, deformation and corrosion

If there are problems:

Rectify problem subject to separate repair order.

5

Check piston rods (8) in visible area for damage, deformation and corrosion

If there are problems:

Rectify problem subject to separate repair order.

6

Check spring seat (7) for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

7

Check condition of springs (6)


Springs (6) may not be broken and must be seated correctly.
Damage can occur otherwise.

If there are problems:

Rectify problem subject to separate repair order.

8

Check air suspension bellows (5) for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

9

Check buffer (4) for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

10

Check suspension strut mount (3) in visible area for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

11

Check spring retainer (10) for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

12

Check dust boot (11) for correct seating, damage and deformation

If there are problems:

Rectify problem subject to separate repair order.

Finishing activity

13

Lower vehicle with lifting platform

Povezani dokumenti