Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
1 | Connect Star Diagnosis | ||
2 | Switch off high-voltage system using Star Diagnosis | ||
| |||
If a fault is displayed, disable high-voltage system. | |||
Print out and store power disable event log and, where applicable, shutoff event log of high-voltage system. | |||
| Check | ||
3 | Visually inspect all lines and hoses of the hybrid system as well as all other lines and hoses for oil and coolant | Attention should be paid to leaktightness of the lines and hoses as well as damage or other conditions (e.g. corrosion, porosity, chafing marks etc.) which rule out further use. | |
If damage/defects are found, subject to separate repair order: | |||
| |||
Rectify damage/defects. | |||
4 | Check that all electric lines and hoses as well as the sensor cables for the hybrid system are routed and secured properly and free of chafing | If damage/defects are found: | |
- subject to separate repair order: | |||
| |||
Rectify damage/defects. | |||
5 | Perform initial startup of high-voltage system | ||
|