1 | Connect diagnostic device to diagnostics connection (1). |
2 | Start "XENTRY". |
3 | Select the model series in the menu via the path Selection Brand Product group Vehicle. |
The work procedures are menu-assisted. |
4 | Operate "Xentry Diagnostics" switching panel. |
All required information is automatically read out through this. Read and observe notes. |
1 | Diagnostic connector |
D00.00-1148-06
5 | Operate "Start quick test" switching panel in the "Control unit overview" tab. |
The quick test is performed automatically. Any existing fault codes are read out and can then be rectified. |
6 | Delete stored fault codes. |
If fault codes are stored in the fault memory. |
7 | Disconnect diagnostic unit. |