ar3530b045902a

Removing and installing drive pinion head bearing

Typ ar · téma 35.30 · verzia 0100 · 2016-02-12

Platí pre:

Nie je k dispozícii v jazyku „sk“; zobrazené v jazyku Anglicky.

Zaradenie

Funkčná skupina 2 Podvozok › 35 Zadná náprava › 35.30 Náhon, Hnacie hriadele — Rad 688 (modely 272, 276, 277)

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Rad 688 (modely 272, 276, 277)

Platí aj pre motory/prevodovky: 743 ***, 743 498

AR35.30-B-0459-02A

Removing and installing drive pinion head bearing

Removing and installing drive pinion head bearing

000 589 45 33 00

Puller

Removing and installing drive pinion head bearing

B33.30-0008-02

Remove

1 Remove, from the pinion, the lock-ring of the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0007-02

2 Pull the roller bearing's inner race.

Removing and installing drive pinion head bearing

B33.30-0012-01

Installing

The inner race of the roller bearings are to be heated up to 80 °C to enable the assembly on the pinion.

3 Assemble the inner race of the roller bearing on the pinion tip with an appropriate drift.

4 Install the snap-ring.