ar3320d145205b

Install transverse control arm on front axle beam

Typ ar · téma 33.20 · verzia 0109 · 2009-11-17

Platí pre: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.413 /409 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

Nie je k dispozícii v jazyku „sk“; zobrazené v jazyku Anglicky.

Zaradenie

Funkčná skupina 2 Podvozok › 33 Predná náprava › 33.20 Vedenie kolies, Náboj — Rad 690 (modely 6**) · Rad 901 · Rad 902 · Rad 903 · Rad 904

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.41 Transverse control arm/control arm/stabilizer bar — Rad 690 (modely 6**) · Rad 901 · Rad 902 · Rad 903 · Rad 904

Platí aj pre motory/prevodovky: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-05B

Install transverse control arm on front axle beam

Wheel location, hub

Number

Designation

Front axles
730.408/409/410/
411/413/414/
415/606

Front axle
732.2 in model 690.6

BA33.20-N-1003-01A

Bolt, stop plate to transverse control arm

M10

Nm

60

60

Install transverse control arm on front axle beam

D33.20-0002-01

1 Coat rubber springs of wishbone (12) with oil.

2 Support wishbone (12) with jack.

3 Insert front wishbone arm into bearing bracket and fix with wishbone bolt (2).

Replace nut on wishbone screw joint, but do not tighten.

4 Lower jack under wishbone.

Install transverse control arm on front axle beam

D33.20-0004-01

5 Insert the rear wishbone arm into the bearing bracket and fix with wishbone bolt (2).

Replace nut on wishbone screw joint, but do not tighten.

Install transverse control arm on front axle beam

D33.20-0020-01

6 Bolt stop plate (7) onto wishbone (12) .

Use new bolts.