Remove/install poly-V belt pulley at vibration damper

Typ ar · téma 13.22 · verzia 0112 · 2010-07-01

Platí pre: ENGINE 902.9, 906.9, 926.9 in MODEL 957

Nie je k dispozícii v jazyku „sk“; zobrazené v jazyku Anglicky.

Zaradenie

Funkčná skupina 1 Motor › 13 Kompresor vzduchu, Remeňové pohony › 13.22 Jednoremeňový pohon — Rad 902 (modely 9**) · Rad 906 (modely 9**) · Rad 957

EinPAS 15 Engine › 15.15 Combustion engine, complete/engine housing/crank assembly › 15.15.41 Crankshaft/flywheel/drive plate — Rad 902 (modely 9**) · Rad 906 (modely 9**) · Rad 957

EinPAS 15 Engine › 15.18 Belt drive › 15.18.30 Belt/belt pulley/clamping device/guide pulley — Rad 902 (modely 9**) · Rad 906 (modely 9**) · Rad 957

Platí aj pre motory/prevodovky: 926 9**

AR13.22-W-0002A

Remove/install poly-V belt pulley at vibration damper

30.6.10

ENGINE 902.9, 906.9, 926.9 in MODEL 957

Remove/install poly-V belt pulley at vibration damper

W13.22-1035-06

Shown on engine 926.9

1 Bolts

2 Belt pulley (for hydraulic pump.)

3 Centering piece

4 Vibration damper

5 Poly-V belt (hydraulic pump)

 	Remove/install
1	Remove poly-V belt (5) for hydraulic pump		AR13.22-W-1203A
2	Detach belt pulley (2) together with centering piece (3) at vibration damper (4)		*BA03.30-N-1004-01C
3	Remove belt pulley (2) from centering piece (3)
4	Install in the reverse order

 Flywheel, driven plate, vibration damper, starter ring gear

Number	Designation		Engine 902.9, 906.9 with code MS8	Engine 904.9, Engine 902.9, 906.9 without code MS8	Engine 924.9, 925.9 926.9


BA03.30-N-1004-01C	Bolt, belt pulley to vibration damper	Nm	60	60	60

Odkazované dokumenty

ar1322w1203a