D07.07-1118-08
1 | Air intake hose downstream of air filter | B2/5 | Hot film MAF sensor (with engine 646) | B2/14 | Hot film MAF sensor (with engine 642.896/898) | ||
2 | Air filter housing | B2/7 | Hot film MAF sensor (with engine 642.992/993) | ||||
3 | Electrical connection | B2/12 | Hot film MAF sensor (with engine 651) |
| Remove/install | ||
1 | Remove air intake hose downstream of air filter (1) on hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) | ENGINE 642, 646, 651 in MODEL 906 | |
ENGINE 642 in MODEL 906 | |||
ENGINE 646 in MODEL 906 | |||
2 | Disconnect electrical connection (3) on hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) | ||
3 | Remove screw/bolts on hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) | ||
4 | Remove hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) from the air filter housing (2) | Installation: Check O-ring for damage; replace if necessary. | |
5 | Install in the reverse order | ||
6 | Connect diagnostic system, clear fault memory and perform initialization of the hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) with diagnostic system | When replacing the hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) | |
|