Stub axle |
Number | Designation | Front axle 732.560/561 | Front axle 732.562 | ||
BE33.25-B-1001-01B | Stub axle | External diameter | mm | - | - |
Normal internal diameter - inner | mm | - | - | ||
Normal internal diameter - Upper | mm | - | - | ||
Normal internal diameter I - inner | mm | - | - | ||
Normal internal diameter I - Upper | mm | - | - | ||
Normal internal insert I - inner | mm | - | - | ||
Normal internal insert I - upper | mm | - | - | ||
BE33.25-B-1002-01B | Maximum allowed eccentricity between the shaft end bearing seats | mm | 0,04 | 0,04 | |
BE33.25-B-1003-01B | Axle knuckle axial play at the beam handle | Clearance tolerance | mm | 0,05 | 0,05 |
Available thicknesses of washers | mm | 3,6...4,5 | 3,6...4,5 | ||
BE33.25-B-1004-01B | Beam handle temperature to assemble the master pin | °C | - | - | |
BE33.25-B-1005-01B | Needle roller bearing | External diameter | mm | - | - |
Normal internal diameter | mm | - | - | ||
Insert inner diameter | mm | - | - | ||
Width | mm | - | - | ||
Width A | mm | - | - | ||
Width B | mm | - | - | ||
Width B | mm | - | - | ||
BE33.25-B-1006-01B | Edge pitch | Measurement B | mm | 4,8...5,0 | 4,8...5,0 |
Please see the Document | |||||
Measure A | mm | 4,5...4,7 | 4,5...4,7 | ||
See document | |||||
BE33.25-B-1008-01B | Sleeves | External diameter | mm | - | - |
Normal internal diameter - Lower | mm | - | - | ||
Normal internal diameter - Upper | mm | - | - | ||
Normal internal diameter - Lower | mm | - | - | ||
Normal internal diameter I - Upper | mm | - | - | ||
internal diameter insert I - Lower | mm | - | - | ||
Normal internal insert I - upper | mm | - | - | ||
BE33.25-B-1009-01B | Maximum radial play | mm | 0,097 | - |