AR91.40-P-0611-02RT | Ignition of removed emergency tensioning retractors | ||
Danger! | Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. | Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. | |
| Notes on controlled deployment of airbag, sidebag and emergency tensioning retractor units | ||
| Notes on disposing of airbag and emergency tensioning retractor units | All models |
P91.60-0219-01
2 Pressure switch, battery control
3 Pressure switch, deployment
4 Rotary switch
5 Indicator lamp, deployment
7 Plug connector, adapter cable
8 2-pin plug connector
Using the deployment device
1 Plug the 2-pin plug connector (8) into the unit to be scrapped.
2 Dial the rotary switch (4) to position "1".
3 Press the battery control pressure switch (2) and deployment pressure switch (3) simultaneously.
Keep a distance of 10 m for safety.
After a successful deployment, the deployment indicator lamp (5) flashes.
Связанные документы
- ah9160p061102p Указания по контролируемой активации блоков фронтальных / боковых подушек безопасности и натяжителей ремней безопасности
- as9100z000101a Опасность получения травмы при проведении работ по диагностике и ремонту подушекбезопасности или аварийных натяжителей ремней б
- os9100p000101a