Remove/install side sill protective molding

AR88.80-P-1050FF

Remove/install side sill protective molding

14.8.03

 

Remove/install

 Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

1

Raise vehicle

2

Remove expansion clips (4) from front rocker panel (1) or rear rocker panel (2).

 Installation: Replace damaged expansion clips (4).

3

Remove expansion clips (3) from front rocker panel (1) or rear rocker panel (2) in area of fender liner.

 Installation: Replace damaged expansion clips (3).

4.1

Lightly pull front rocker panel (1) away from vehicle and pull off toward front

When removing front rocker panel (1).

 Carefully remove front rocker panel (1) to prevent paint damage

 Installation: Position front rocker panel (1) with brackets (5) inserted and press on

5.1

Lightly pull rear rocker panel (2) away from vehicle and pull off toward rear

When removing rear rocker panel (2).

 Carefully remove rear rocker panel (2) to prevent paint damage

 Installation: Position rear rocker panel (2) with brackets (5) inserted and press on

6

Unscrew bracket (5) from longitudinal member

 Installation: Check bracket (5) for damage, replace if necessary.

Insert bracket (5) into front rocker panel (1) or rear rocker panel (2)

7

Install in the reverse order