P88.40-2419-05
1 Engine hood
2 Bolts
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Open engine hood (1) | ||
2 | Unscrew bolts (2) from engine hood (1) | Before loosening bolts (2) mark installation position. | |
Installation: Ensure that engine hood (1) fits properly, if necessary: | |||
Adjust engine hood (1) | |||
3 | Remove engine hood (1) | Helper required | |
4 | Install in the reverse order | ||
5.1 | Install air intake grate | When replacing engine hood (1) on vehicles up to production date 5.6.05 or on customer request on vehicles as of production date 6.6.05. | |
| Retrofit air inlet grate |
Связанные документы
- ar8840p3020ff
- as0000z001101a Опасность получения травмы в результате защемления или зажатия пальцев при снятии, установке и регулировочных работах на капотах
- az8840p0002ff