Removing and installing front bumper

Тип ar · тема 88.20 · версия 0107 · 2004-10-21

Применимость: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Нет на языке «ru»; показано на языке Английский.

AR88.20-D-2000B

25.4.96

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

D88.20-0001-06

1 License plate

2 Phillips screws

3 Cover

4 Collared bolts

5 Cover

6 Expanding rivet

7 Bumper

 	Removing, installing
1	Unscrew license plate
2	Remove covers (3) and unscrew collared bolts (4)	 Installation: Replace micro-encapsulated collared bolts (M8)
			*BA88.20-N-1001-01A
3	Remove covers (5) and pull out expanding rivet (6)	 Pull out rivet by screwing a sheet metal screw (M4.2x30 or longer) into the expanding rivet.  Installation: Replace expanding rivet
4	Remove bumper (7)
5	Install in the reverse order

Bumper

Number	Designation		Models 690.6, 901, 902, 903, 904, 905


BA88.20-N-1001-01A	Collared bolt, front bumper to body	Nm	23