AR86.30-D-0061EC | Remove/install fresh water tank level sensor | 17.3.05 |
MODEL 903.6 with CODE (ZL9) "James Cook" touring camper
D54.10-1109-08
1 Seat belts
2 Bench seat
3 Upholstery
4 Cover
D86.30-0149-09
5 Electrical connector
6 Cleaning cover
10 O-ring
11 Float
B146/2 Fresh water fill level sensor
8 O-ring
9 Nut
| Remove/install | ||
Danger! | Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | When moving components, ensure that no body parts or limbs are within the operating range of moving parts. | |
1 | Disengage seat belts (1) from seat belt buckles | ||
2 | Move bench seat (2) toward front | ||
3 | Remove upholstery (3) | ||
4 | Fold out cover (4) | ||
5 | Disconnect electrical connector (5) | ||
6 | Turn cleaning cover (6) with fresh water fill level sensor (B146/2) in direction of arrow | ||
7 | Remove cleaning cover (6) with fresh water fill level sensor (B146/2) | Installation: Check O-ring (8) for damage, replace if necessary | |
8 | Unscrew nut (9) | ||
9 | Remove fresh water fill level sensor (B146/2) | Installation: Check O-ring (10) for damage, replace if necessary | |
10 | Check fresh water fill level sensor (B146/2) for proper function. | Connect fresh water fill level sensor (B146/2) with connector (5) and move float (11).Water level sensor in camper operating and display unit (A97) must change. | |
11 | Install in the reverse order |
Связанные документы
- as0000z001101a Опасность получения травмы в результате защемления или зажатия пальцев при снятии, установке и регулировочных работах на капотах