ar8325d1124c

Remove and install air conditioning control and operating unit

Тип ar · тема 83.25 · версия 0102 · 2011-07-08

Применимость: MODEL 900, 906.1 /2 /6 /7 with CODE (HH9) Regulated air conditioning (Tempmatic) MODEL 900 with CODE (HK4) Rear air conditioning, reinforced MODEL 906.6 /7 with CODE (HH9) "Tempmatic" regulated air conditioning with CODE (HH7) Additional air conditioning in rear MODEL 906.6 /7 with CODE (H08) High-performance air conditioning

Нет на языке «ru»; показано на языке Английский.

Расположение

Функциональная группа 3 Кузов › 83 Кондиционирование воздуха › 83.25 Система автоматического отопления — Серия 900 · Серия 906 (модели 1**, 2**, 6**, 7**)

EinPAS 39 Отопление / вентиляция / охлаждение › 39.15 Система кондиционирования › 39.15.11 Блок управления / реле — Серия 900 · Серия 906 (модели 1**, 2**, 6**, 7**)

EinPAS 39 Отопление / вентиляция / охлаждение › 39.15 Система кондиционирования › 39.15.33 Панель управления / тяга — Серия 900 · Серия 906 (модели 1**, 2**, 6**, 7**)

AR83.25-D-1124C

Remove and install air conditioning control and operating unit

28.6.11

MODEL 900, 906.1 /2 /6 /7 with CODE (HH9) Regulated air conditioning (Tempmatic)

MODEL 900 with CODE (HK4) Rear air conditioning, reinforced

MODEL 906.6 /7
with CODE (HH9) "Tempmatic" regulated air conditioning
with CODE (HH7) Additional air conditioning in rear

MODEL 906.6 /7 with CODE (H08) High-performance air conditioning

Remove and install air conditioning control and operating unit

D83.25-1118-11

Shown with code (HH7) Additional air conditioning in rear

1 Bolts

S98 AAC [KLA] control and operating unit

Remove/install

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

1

Connect Star Diagnosis and conduct initial startup of AAC [KLA] control and operating unit (S98)

When replacing the AAC [KLA] control and operating unit (S98).

AD00.00-D-2000-04SD

2

Unclip bezel with UCP control unit on instrument panel center section, and disconnect electrical connector from UCP control unit

3

Remove bolts (1)

4

Pull out AAC [KLA] control and operating unit (S98) from instrument panel

5

Disconnect electrical connector on the rear of the AAC [KLA] control and operating unit (S98)

6

Install in the reverse order

7

Check AAC [KLA] control and operating unit (S98) for proper operation

Связанные документы