AR82.20-P-1100FF | Remove/install front overhead control panel | 16.8.06 |
MODEL 454.0 with CODE (C27) Telephone preparation incl. fastener and antenna (DFO/FFO)
MODEL 454.0 with CODE (V29) Electric glass sliding roof (FFO)
MODEL 454.0
with CODE (C27) Telephone preparation incl. fastener and antenna (DFO/FFO)
with CODE (V29) Electric glass sliding roof (FFO)
P82.20-2958-08
Shown on vehicle with code (V29)
Electric glass sliding roof (FFO) and with code (C27) Telephone preparation incl. fastener and antenna (DFO/FFO)
B25x1 Hands-free system microphone group connector
E15/2 Interior lamp
S13/2x1 Tilting/sliding roof switch connector
1 Headliner
2 Overhead control panel
3 Electrical connector
B25 Hands-free system microphone group
| Remove/install | ||
1 | Push back clips (arrows) using suitable screwdriver and unclip overhead control panel (2) | Installation: Push overhead control panel (2) into headliner (1) until clips (arrow) engage. | |
2 | Remove overhead control panel (2) from headliner (1) | ||
3.1 | Disconnect connector for SHD switch (S13/2x1) | On vehicles with code (V29) electric glass sliding roof (FFO) | |
4.1 | Disconnect hands-free system microphone group connector (B25x1) of hands-free system microphone group (B25) | In vehicles with code (C27) Telephone preparation incl. fastener and antenna (DFO/FFO) | |
5 | Disconnect electrical connector (3) from interior lamp (E15/2) and remove overhead control panel (2) | ||
6 | Install in the reverse order | ||
7 | Perform a function test |