The rubber buffers are installed to avoid damage to the B-pillar when the sliding door is closed with a swing.
The rubber buffers are installed at the factory as of V IN 725 456 as a standard feature.
1 Glue upper rubber buffer (7) to B-pillar approx. 30 mm above upper inlet guide (8).
D72.16-0055-01
2 Glue bottom rubber buffer (7) approx. 35 mm below bottom inlet guide (8) to B-pillar
Glue rubber buffer (7) only to outer edge (arrow) of B-pillar so that the sealing frame cannot be pinched between the sliding door and rubber buffer when the sliding door is closed.
