D72.15-1123-06
1 Top door gap
2 A-pillar door gap
3 Door gap on B-pillar
4 Door gap on wheel well
5 Bottom door gap
A Ridge pattern
B Door gap
Adjust | |||
1 | Check door gap (B) and ridge pattern (A) along hinged door all the way around | Ensure that ridge transitions do not have shoulders. | |
Upper door gap (1) | |||
Lower door gap (5) | |||
A-pillar door gap (2) | |||
B-pillar door gap (3) | |||
Wheel arch door gap (4) | |||
Feeler gauge | |||
2 | Adjust door gaps (B) and ridge pattern (A) | ||
Upper door gap (1) | |||
Lower door gap (5) | |||
A-pillar door gap (2) | |||
B-pillar door gap (3) | |||
Wheel arch door gap (4) | |||
| |||
Feeler gauge | |||
3 | Adjust installation depth | Adjust transitions of front door from flush to max. 1 mm sinked in, at rear with a protrusion of 0.2 mm to 1 mm (wind noises). Rotary tumbler should engage in the center of the locking eye. | |
|
Hinged doors check values
Number | Designation | Model | Model | |
BE72.15-N-1001-01A | Top door gap | mm | 5 (0.8) | 5 (0.8) |
BE72.15-N-1002-01A | Bottom door gap | mm | 5.5 (1.0) | 5.5 (1.0) |
BE72.15-N-1003-01A | A-pillar door gap | mm | 5.5 (1.0) | 5.5 (1.0) |
BE72.15-N-1004-01A | Door gap on B-pillar | mm | 5.5 (1.0) | 5.5 (1.0) |
BE72.15-N-1005-01A | Door gap on wheel well | mm | 6.5 (1.0) | 6.5 (1.0) |
Hinged doors
Number | Designation | Model | Model | Model | ||
BA72.15-N-1008-01C | Bolt, door hinge to hinged door | Nm | 23 | 23 | 23 | |
BA72.15-N-1013-01C | Bolt, striker bolt to B-pillar | Nm | 20 | 20 | 20 | |
Feeler gauge
129 589 03 21 00