P72.10-3141-07
1 Mirror triangle cover
2 Clips
3 Electrical connector
4 End molding strip
5 Noise insulation
| Remove/Install | ||
1 | Open front door | ||
2 | Completely move down window | ||
3 | Switch off ignition and remove transmitter key from EIS [EZS] control unit | On vehicles with Keyless Go, code 889: Press keyless go start/stop button repeatedly until ignition is switched off Remove transmitter key from vehicle and store it in a location beyond its transmission range (at least 2 m). | |
4 | Switch off radio | See Operator's Manual | |
5 | Unclip mirror triangle cover (1) | Installation: Ensure that clips (2) and end strip (4) are seated correctly | |
Mounting wedge | |||
6 | Disconnect electrical connector (3) below noise insulation (5) | ||
7 | Remove mirror triangle cover (1) | ||
8 | Install in the reverse order |
Mounting wedge
110 589 03 59 00