Adjustment values for front door
Number | Designation | Models | |
BE72.10-N-1002-01C | Installation depth for front door to A, | mm | 0 (+1/-2) |
129 589 03 21 00
Feeler gauge
Adjusting installation depth at front of front door
1.1 Mark installation position for hinges (6, 9).
1.2 Loosen screws (8, 11).
1.3 Adjust installation depth at front of front door so that the exterior surface of the front door is flush with the adjacent surfaces.
Moving the hinges (6, 9) toward the inside moves the front door (1) deeper into the door cutout. Moving the hinges (6, 9) toward the outside causes the front door (1) to extend from the door cutout.
1.4 Tighten screws (8, 11).
L72.15-0013-03
Adjusting installation depth at rear of front door
2.1 Loosen screws (3) on striker (2).
2.2 Adjust installation depth at rear of front door so that the exterior surface of the front door is flush with the adjacent surfaces (C) in the closed state (striker caught in 2nd catch).
When the striker (2) is moved toward the inside the front door (1) is positioned deeper in the door cutout. When the striker (2) is moved toward the outside the front door (1) extends from the door cutout.
2.3 Tighten screws (3) on striker (2).
L72.15-0015-03