P68.30-3040-11
Shown on paneling on left
1 Spare wheel cover
2 Anchoring hook
3 Clip
4 Cover
5 Paneling
6 Rear center section paneling
7 Expansion rivet
8 Frame
| Remove/Install | ||
1 | Remove rear center section paneling (6) | ||
2 | Remove anchoring hook (2) | Note correct installation positions. | |
3 | Remove expansion rivets (7) | Installation: Check expansion rivets (7) for proper state, replace if necessary | |
4 | Remove clip (3) | Installation: Check clip (3) for proper state, replace if necessary | |
5 | Remove frame (8). | ||
6 | Remove paneling (5) from trunk | Installation: Ensure that paneling (5) is seated properly below spare wheel cover (1) and on center paneling (arrows). | |
7 | Install in the reverse order |