P68.30-2882-09
1 Upper B-pillar paneling
2 Lower B-pillar paneling
3 Cap
6 Clip
7 Edge guard
4 Seat belt guide bracket
5 Clip
| Remove/Install | ||
1 | Remove edge guard (7) from B-pillar on both sides in area of B-pillar paneling. | Installation: Ensure that edge guard (7) is seated properly. | |
2 | Carefully unclip lower B-pillar paneling (2) from top to bottom | Installation: Check clips (6), replace if necessary. | |
3 | Remove lower B-pillar paneling (2) upward out of retaining lugs (arrows) | ||
4 | Unclip cap (3) from seat belt guide bracket (4) | ||
5 | Unscrew bolt from seat belt guide bracket (4) and remove seat belt guide bracket (4) | Installation: Ensure that belt is routed properly | |
| |||
6 | Unclip upper B-pillar paneling (1) | ||
7 | Remove upper B-pillar paneling (1) upward out of retaining lug (arrow) | Installation: Check clips (5), replace if necessary. | |
8 | Install in the reverse order |
Seat belts/emergency tensioning retractors